QUALITY CONTROL
- CMM (Coordinate Measuring Machine) by Brown & Sharpe.
Has repeatability of .00016 and Volumetric Performance of .0004.
- ROMER CimCore3000i CMM Arm
Has full articulating arm with volumetric performance of .0012
Table Size: 48" x 96"
- Optical Comparator with Q16 Metrology Computer and Printout,
.0001 Digital 3-Axis readout
- SPC Software Mitutoyo Measure Link.
With SPC Real-time Process Analyzer and part traceability.
Mitutoyo Mig 4 direct download interface.
- Digital coating measurement gage (Model #CGX-A)
- Digital Height Gage Mitutoyo Linear Height 600 24", .0002 TIR
- Surface tester (Surftest III by Mitutoyo)
- Hardness tester (Dayton 3 x 140)
PRODUCTION
- Trumpf 4000 Watt Laser
Auto Pallet Changer (5' x 10' Table)
1" Mild Steel
¾" Clean Cut Stainless
½" Aluminum
Brass & Titanium
Rapid 3400 IPM
- Flow 100 H.P. Twin Head Dynamic Waterjet
6-1/2' x 13-1/2' Table
Taper Free cutting up to 6"
Maximum cutting thickness 10"
Can cut virtually any material
- Haas CNC Vertical Machining Center
3D hard machining
12,000 rpm direct drive
30 horse power-60 peak
24 tool changer
Ultra precision Nikken Tooling .0002 TIR
2.8 second tool changer
Thermally controlled spindle head
1,000 psi through-spindle coolant with programmable coolant nozzle
Programmable air for hard tooling
Renishaw advanced probing system
Programmable minimum oil machining for tapping
40” X 20” X 25” cutting envelope 1750 lbs
- Sodick Wire EDM
5 axis programmable
Linear drives
21” X 14” X 12” cutting envelope 3500lbs
Submerged cutting
High position accuracy (+/- .00004)
High finish (9 micron)
30 degree taper at 12”
- Accurpress Precision 9-Axis Forming Press Brake
9-axis CNC driven with fully independent back gages
Up to 285 tons
Up to 21” stroke +/- .0004
Hydraulic quick change clamping
1” forming of mild steel
12’ long +/- .0004 end to end
CNC auto crowning
- Additional Equipment
24 OBI punch presses, 30 to 220 Ton Capacity
Coil feed punch presses up to 60 tons
9 additional brake presses
2- Shear's .005 - .250 (1010 mild steel)
12 Drill Presses
8 Tapping Machines
2 additional Wire EDMs
Spot Welders up to 100 kva
4 Welding Cells: Mig, Tig, Stud & Stick up to 455 amps
3 Vibratory Finishing Units up to 20 cubic feet (18" part)
6 Surface Grinders up to 16 x 24 Plate Size
1 Lathe
2 3-Axis Articulating Tapping Arm - up to 1" tap
ENGINEERING
- CAD/CAM programming
Using AutoCad LT, AutoDesk Inventor, Feature Mill, EZ Edm,
Flowmaster waterjet software, & ToPs 100 laser software.
Digitizing software to reverse engineer component parts with no prints.
INVENTORY
- Ferrous and Non-Ferrous Material from .015 to 1.000
SHIPPING
- Parts are weighed and counted by our 2 Weigh-Tronix PC-902
High Precision Digital Counting Scale
Delivery via our 2- 1 ton Company Vans, or Common Carrier
|